:	Jun 30, 2004

.

Disconnect the battery ground cable.

.

Drain the cooling system.

.

Remove the accessory drive belt.

.

:   Loosen the bolts prior to removing the accessory drive belt. Remove the coolant pump pulley.   Remove the 3 bolts.

.

Remove the coolant pump.   Remove the 3 bolts.   Discard the O-ring seal.

.

Install the coolant pump.   Clean the component mating faces.   Install a new O-ring seal.   Tighten the bolts to 10 Nm (7 lb.ft).

.

Install the coolant pump pulley.   Clean the components.   Tighten the bolts to 25 Nm (18 lb.ft).

.

Install the accessory drive belt.

.

Refill and bleed the cooling system.